The Bible Box by Darryl Fullerton


bible-box-pic1
bible-box-pic2
bible-box-pic3

I took a piece of 1″ x 4″ Red Oak cut my pieces at desired lengths (with 45┬░angles), taking the pieces too the router table I put a 1/8″ rabbit on the top; bottom then sanding all pieces.

Nailing all pieces; making sure all is square as possible, measure the opening inside the rabbit, and cut my Burch plywood too fit for the backing.

Next glue the backing in place; cutting the plexiglass too fit the front 1/8″ rabbit then add the hinges; pull knob for the door.


Follow Rock-N H Woodshop